We are in the midst of installing a small residential LC system in Valley Forge PA. This system was to help us evaluate the LumenCache (LC) system as it fits nicely into our company tagline of PV / EV / Smart Home.
The project was a whole house rehab with several internal rooms being completely opened up. We decided to start with emergency lighting to leverage the LC battery backup functionality... primary bedrooms, hallway, kitchen, family room and out to door. We decided to expand the system to include many of the LC variants from wiring pattern (daisy chain to home run), to lighting type (constant current ceiling fixtures to constant voltage multi-bulb fixtures and LED strips), to switch types (momentary decora to occupancy sensor or both).
We just finished connecting the LC system to HomeSeer (home automation control software) that is hosted on a raspberrypi3 mounted in the LC cabinet. Currently, the only client is a PC based browser or an iPhone which leverages the voice activated features. Our next step will be to install a Pi touch screen.
Our impressions thus far have been very favorable. Once you get your head around direct DC lighting over CAT5, everything falls into place
Start a discussion thread about your project. We recommend slightly drscripetive titles like "Solar and Passive House in Denver" or "Smith farmhouse upgrade 2014".
3 posts • Page 1 of 1
Finally finished the first of 6 videos on our experience implementing LumenCache... System Overview. The YouTube video can be accessed from our website at:
Finally finished the second of 6 videos on our experience implementing LumenCache... System Components. The YouTube video can be accessed from our website at:
Who is online
Users browsing this forum: No registered users and 1 guest