First looks at the new 50W L2-CC constant current driver. This module easily powers 2x4 lights and has 3 current settings. It is a buck topology so the panel DC power supply needs to be above the LED voltage and any wire drop. For commercial projects, use the HEP-1000-54 and set it to 60V for up to 200ft runs.
The driver is 95% efficient, so with typical wire lengths you should reach 88-89% total system efficiency from the AC power source to the LED. This is on par with AC LED fixtures, and that's before power factor losses from AC LEDs without PFC.
(moderated) New members: Say Hello here! News and Events from LumenCache as well as new product announcements.
1 post • Page 1 of 1